Tripod adapater 3/8M-3/8F
Tripod Spacer for Geared Head Double 3/8'' attachment Allow to reach fully 90° tilt range
€26.03Adapter 3/8 F-3/8DF
Joint for arms Converts 3/8'' screw to 1/4'' Allows using accessory arm as column extension Made of aluminium
€26.03Wind Up Stand CS 260cm/102in 1 Riser, Braked...
Avenger's smallest junior wind up stand with universal top. Steel column & legs with steel geared riser and 1 levelling leg. 75 mm/ 2.95'' Braked wheels for smooth to semi-smooth surfaces 2 sections, 1 riser. Ø: 55, 45 mm Leg Ø: 30 mm Built-in fold away crank handle for easy load lifting...
€1,006.97Backlite Pole Black extendable arm 48cm to 80cm
It is for the base of the Backlight Stand Two section black aluminum pole to raise small lighting fixture It can be used as a small portable boom
€35.99Wind Up Stand CS 3.0m/9.8ft 2 Riser, Braked Wheels
Avenger's low base junior wind up stand with universal top. Steel column & legs with steel geared risers & 1 levelling leg. 75 mm/ 2.95'' Braked wheels for smooth to semi-smooth surfaces 3 sections, 2 risers. Ø: 55, 45, 38 mm Leg Ø: 30 mm Incl. Built-in fold away crank handle and column...
€1,175.82Super Boom Pivot Clamp
pivoting clamp for use with all Super Booms and Heavy Duty Booms for 35mm diameter boom shafts 1/8'' male, and 5/8'' female receptor
€64.51Pivoting Clamp For Light Boom
It allows mounting of the 3085 Boom Arm to a heavy duty stand It permits tilt, swing and swivel Easy to use
€55.45Overhead Stand 42 CS Medium 3 Riser 420cm/167in
Silver Overhead Stand with built-in grip head & junior receiver Works well with overhead, modular & fold away butterfly frames Standard base w/o wheels. Optional A9000N wheels available Mobile Column w/double locking T-knobs on the spider castings 4 sections, 3 risers. Ø: 45, 40, 35, 30...
€486.40SHORT ADAPTER SPIGOT 3/8''+3/8''
Spigot with two 3/8'' screws Versatile use Two 3/8'' screw attachments Made of Brass
€4.75Overhead Steel 56 CS Large Wide Base 3R...
Silver Overhead Stand with built-in grip head & junior receiver Works well with overhead, modular & fold away butterfly frames Wide base w/2 levelling legs w/o wheels. Optional A9000N wheels Mobile Column w/double locking T-knobs on the spider castings 4 sections, 3 risers. Ø: 45, 40,...
€588.25Overhead Stand 65 CS Large Wide Base 4R 6.5m/21.3'
Silver Overhead Stand with built-in grip head & junior receiver Works well with overhead, modular & fold away butterfly frames Wide base w/2 levelling legs. Wheels not recommended. Mobile Column w/double locking T-knobs on the spider castings 4 sections, 3 risers. Ø: 50, 45, 40, 35 mm....
€724.05Reversible rubber/metal spiked foot
Set of 3 reversible rubber/metal spiked feet Supplied with a dedicated fixing tool Made of a special hard anodised aluminium alloy Extremely resistant to corrosio
€29.20Baby Roller Low Base 290cm/114in CS Base, Alu...
Baby roller stand with low leg base and braked wheels Steel column, aluminium risers & captive locking T-knob handles. 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg ø: 20 x 20 mm Nuts & bolts construction complete with levelling leg Mobile Column w/double locking T-knobs on the spider...
€413.97Baby Roller Stand High Low Base 3.4m/11.2' CS &...
Junior roller stand with folding leg base and braked wheels Very popular stand for holding LED, fresnels and smaller HMI's. 4 sections, 3 risers. Ø: 45, 40, 35, 30 mm. Steel column, aluminium risers & captive locking T-knob handles. Folding base great for self-standing storage when not in use
€508.13Repro Arm with Double Camera Attachment Black
Allow positioning of 2 heads on a 90° perpendicular angle Mounts on any column with 3/8'' thread and 60mm disc 3/8'' female thread attachment
€96.19Junior Roller Stand Low Base Braked 3.6m/11.8' CS
Junior roller stand with low leg base and braked wheels (A9000N) Steel column, steel risers & captive locking T-knob handles. 3 sections, 2 risers. Ø: 45, 40, 35 mm. Max height:360 cm/141.7'' Mobile Column w/double locking T-knobs on the spider castings Wide footprint for extra stability on...
€595.04Accessory Arm For 4 Heads
Allow positioning of 2 heads on a 90° perpendicular angle Mounts on any column with 3/8'' thread and 60mm disc 3/8'' female thread attachment 2 positional head mounts on the side arm for mounting of 4 hea
€155.95Baby Roller Stand High Low Base 4.3m/14.1' CS &...
Baby roller stand with low leg base and braked wheels Steel column, aluminium risers & captive locking T-knob handles. 4 sections, 3 risers. Ø: 35, 30, 25, 20 mm. Leg Ø: 20 x 20 mm Nuts & bolts construction complete with levelling leg Mobile Column w/double locking T-knobs on the spider...
€452.45Table Attached Centre Post
Geared column with clamp Compatible with table thickness from 18-38mm Adjustable between 5cm and 66cm 3/8'' screw attachment
€225.20Stand Adapter from 5/8" to 1/2"
Top attachment 5/8'' (16mm) stud Attachement 5/8'' (16mm) socket Aluminium Construction 9,7cm in height
€15.62ADJUSTABLE GAFFER GRIP
25mm to 65mm gaffer grip for great versatility Adjustable jaws ensure a tight and secure grip Complete with two 16mm baby studs for added versatility Designed with world-leading Italian quality standards Gaffer grip attaches to a wide range of accessories
€60.89Extension Bar Black For Super Clamps
16mm Hexgon stud for Super Clamp Top attachment 16mm Hexgon stud for Super Clamp Used to fix two superclamp 16,5cm in height
€14.71Klamra trzpień 16mm (5/8") 100Kg 10-55mm
€87.14
Heavy Extension Aluminium One Section Black
€82.61
Black Aluminium Extension 2-Section Stand
It extends the height of your heavy duty cine stand 49.2 - 82.7'' It has two black sections, one riser Made of aluminium
€112.94Barrel Clamp, Silver w/Wingnut
€112.04
Steel Extension 2-Section Stand
Minimum extension is 4.3ft (1.3m), the maximum is 7.25ft (2.2m) One riser is 35mm in diameter, the second is 30mm in diameter Chrome steel extension
€119.73Barrel Clamp, Black w/T-Knob 42-52mm/1.65-2.04'' Ø
Made from gravity cast aluminium in black finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' TÜV/SÜD certified Max Capacity 300 kg/661.4 lbs when using the 28 mm/1 1/8 Socket Includes safety cable with pin to secure junior pins in sock
€98.46Camera/Umbrella Bracket For 143
Standard 1/4-20 inch thread mount for cameras Replacement camera platform for the Magic Arm Made of aluminium Standard 1/4 thread for cameras
€19.24Drop Ceiling Scissor Clamp w/Baby Pin 16mm/ 5/8in
16 mm/ 5/8'' baby pin: scissor clip designed for drop ceilings Ideal for small and medium light fixtures Works well with C1005 to hold cables Easily tighten and remove scissor clip by spinning the baby pin Special adapters should be carried in all kits
€17.88Fork for Styrene Gobos
For polystyrene Gobo's Supplied with 1/4'' and 3/8''female attachments Robust construction Size: 12,5 x 20cm
€17.88Drop Ceiling Scissor Clip with Cable Support
Cable support with scissor clip designed for drop ceilings Ideal to support cables and cords from drop ceilings Works well with C1000 baby pin scissor clips Easily tighten and remove scissor clip by turning thumb screw Special adapters should be carried in all kits
€23.77Black Aluminium High Stand Extension
It extends a duty stand of additional 53 - 123.6'' (1.4 - 3.1 m) It has two locking riser sections Made of aluminium
€144.63Super Clamp™ T-Knob Silver, 13mm-55mm/0.51 to...
Super Clamp™ jaws work on diameters from 13-55mm/ 0.51-2.16'' TÜV/SÜD certified Load capacity:15 kg/33.1 lbs, used with numerous adapters & arms 16 mm/ 5/8'' hexagonal receiver with double safety lock Available in an HD Gravity Cast version- C1550
€49.57Steel High Stand Extension
It extends a duty stand of additional 53 - 123.6'' (1.4 - 3.1 m) It has two locking riser sections This steel stand extension has a chrome finish
€155.04Eye Coupler MP Clamp w/Wingnut...
Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' Base model MP with non-threaded 12.5 mm/0.5'' hole. Customisable Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified
€31.46Short Adapter Spigot 3/8'' and 1/4''
Spigot with 1/4'' and 3/8'' screws Versatile use 3/8'' to 1/4'' screw attachments Made of Brass
€4.75Eye Coupler MP Clamp w/28mm/1 1/8'' Spigot,...
Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP cheesboro clamp with junior 28 mm/1 1/8'' TV Spigot Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified
€41.87ADAPTER SMALL 3/8 TO 1/4 SET 5
Reducing Bushing Set, from female 3/8'' to 1/4'' male screw Female adapter 3/8'' to 1/4'' Made from Nickel plated Steel 0,5cm in height
€5.66Eye Coupler MP Clamp w/16mm/5/8in Spigot,...
Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP cheesboro clamp with baby 16 mm/ 5/8'' Spigot Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified
€39.61Adapter Stud 5/8'' to 3/8'' thread
1/4'' screw, 5/8'' (16mm) stud Attachement 3/8'' to 1/4'' screw 2,6cm in height Made of Brass
€7.92Eye Coupler MP w/M12 Bolt & Nut,...
Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP Eye Coupler w/M12 bolt & wing nut. Direct connection to yokes Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified
€32.8216mm Female Adapter 17.5 to 5/8''
5/8'' (16 mm) stud and a socket for 11/16'' (17.5 mm) male studs 5/8'' to 17,5mm female adapter Easy to mount 7,8 cm in height
€17.88Eye Coupler MP w/Baby Receiver,...
Joined twin MP couplers free to swivel a full 360° radius Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' Easily connect trusses, bars or pipes Made from aluminium in a silver finish Wing nut tightening to secure both swivel couplers in place
€65.4116mm Female Adapter 5/8''
It is 3.46'' (8.8 cm) long Its unique indentations mesh perfectly with the locking screw 8,8cm in length 16mm female adpater 5/8
€14.71MP Eye Coupler Swivel Tilt 150
Aluminum Construction 6 - 10" Length 1 1/8" Junior Stud
€145.99Microphone Support "T" Arm, Black
Microphone support that attaches with a 16mm pin Measures just 65cm in length Made from durable aluminium Allows you to easily tailor your kit Crafted to Italy’s world-leading quality standards
€101.63Eye Coupler MP Clamp Slim Silver w/12.5mm/0.5in...
Slim MP eye coupler made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' Base model MP with non-threaded 12.5 mm/0.5'' hole. Customisable Slim profile: 30 mm/1.18'' wide w/Max Capacity 180 kg/396.8 lbs TÜV/SÜD certified
€29.20